Pin It
Menu
Follow Us:

Enjoy That Vehicle Longer With a Superior Rebuilt Transmission in Queen Creek


A failing transmission can have a variety of symptoms. For instance, the gears in an automatic transmission might begin to slip when the fluid is low, or the internal clutches wear down. One sign of a potential transmission failure is leaking fluid, but leaks are often difficult to see. One reason for this is the fact that air under a moving vehicle can cause the fluid to spread out and stick on the undercarriage. This allows it to collect road grime that lets the fluid blend in with the other gunk under there. Of course, regular checks of the transmission fluid should indicate that there is a leak. A major leak results in serious wear and the eventual need for a new Transmission in Queen Creek.

There are a couple of ways to repair a failed transmission. One of them is to have an experienced mechanic pull the device apart and rebuild it. This is a very tedious job that is much more difficult than people realize. Plus, there is a huge variety of automatic transmission types, and this makes it difficult to keep track of all the details. A poor rebuild could result in a transmission that functions for a while and fails when it is needed the most. The another solution when fixing a worn Transmission in Queen Creek is a factory rebuilt replacement. This is a transmission that was completely taken apart, thoroughly cleaned and put back together with new components. Any item inside the transmission that can wear out is replaced while items such as the housing and internal shafts are kept. The shafts will be checked to ensure they turn true and the housing will be inspected for signs of damage.

It is possible to extend the service life of most transmissions with the use of regular maintenance. The first step is routinely checking the fluid level, but an even more important task is keeping the inside of the transmission clean. This begins the regular fluid replacement because clean fluid can rinse out the tiny channels that are used for hydraulic functions. However, the best way to clean the transmission is to have it flushed. Flushing gets rid of debris that could result in fluid blockage. Schedule an appointment today and get the most out of that transmission.

Leave a reply


Your email address will not be published. Required fields are marked *

one × 2 =